Lamborghini – New Zone Auto Spare Parts Trading

Expansion Valve for Lamborghini

new zone — Thu, 21 Nov 2024 14:57:45 +0000

An essential part of the car’s air conditioning system is the Lamborghini expansion valve, part number 4S0816679. It controls the amount of refrigerant that enters the evaporator, keeping the cabin cold and cozy even under the most difficult driving circumstances.

The expansion valve is essential to keeping the air conditioning system’s temperature and pressure at the right levels. It transforms the compressor’s high-pressure liquid refrigerant into a low-pressure, low-temperature gas by expanding it. After passing through the evaporator, this gas cools the cabin air by absorbing heat from it. This keeps the cabin cool without wasting energy and guarantees peak performance and efficiency.

In conclusion, the Lamborghini expansion valve, part number 4S0816679, is a crucial part of the car’s air conditioning system that guarantees effective and efficient cooling. Its capacity to precisely regulate the flow of refrigerant makes driving more pleasant and comfortable.

This car part is suitable for the following models:
Huracan Evo Coupe

Drier for Lamborghini

new zone — Thu, 21 Nov 2024 14:51:18 +0000

A receiver-drier for the Huracan’s air conditioning system is the Lamborghini 4S0820191D. It is situated between the evaporator and the condenser in the AC system. Before the refrigerant reaches the evaporator, the drier’s job is to eliminate impurities and moisture. This maintains the AC system’s efficiency and keeps the evaporator from freezing.
The desiccant, a substance that absorbs moisture, is within the enclosed drier. Usually, activated alumina or silica gel are used to make the desiccant. A filter that eliminates impurities from the refrigerant is also included in the dryer.
Replace the drier every 24,000 to 36,000 miles, or sooner if the air conditioning system is leaking or malfunctioning.

This car part is suitable for the following models:
Huracan Evo Coupe, Huracan LP580 Coupe, Huracan LP610 Coupe, Huracan LP610 Spyder

Thermostat Housing for Lamborghini

new zone — Thu, 21 Nov 2024 12:40:22 +0000

A crucial element used to control the engine’s cooling system in a variety of Lamborghini models is the Thermostat Housing, part number 079121115BM. This thermostat housing was expertly engineered and constructed from premium materials to guarantee longevity and resilience to heat stress.

This component efficiently regulates the engine’s coolant flow, enabling ideal temperature regulation and avoiding overheating. The engine’s durability and performance are enhanced by its streamlined design, which encourages effective coolant circulation.

This car part is suitable for the following models:
Gallardo LP560 Spyder, Gallardo LP570 4 SL

Expanding Nut for Lamborghini

new zone — Tue, 19 Nov 2024 12:54:54 +0000

The 6N0809966A Lamborghini is a nut that expands. By extending the nut against the inner surface of the component, expanding nuts are used to join two pieces. Because the expanding force keeps the nut tight, this kind of nut is frequently employed in situations where there is a chance of vibration or loosening.

The expanding nut is made especially for Lamborghini automobiles. It is composed of premium steel and is resistant to corrosion thanks to its black oxide finish. The nut is 16 mm in diameter and has a 4.8 mm thread size.

Numerous Lamborghini vehicles, such as the Huracan, Aventador, and Urus, feature this expanding nut. Usually, it is employed to fasten suspension parts, body panels, and other components.

This car part is suitable for the following models:
Urus

Poly-V-Belt for Lamborghini

new zone — Mon, 11 Nov 2024 06:28:07 +0000

The Lamborghini part number 07M903137C is for a poly V-belt. Poly V-belts transfer power from one source to another. They are composed of many ribs comprised of a high abrasion resistant elastomer compound that has been geometrically designed for maximum contact with the pulley. This enables them to transmit power more effectively than typical V-belts.

The 7M903137C poly V-belt is particularly developed to fit Lamborghini Aventador models. It measures 17.8mm broad and 970mm long. It is critical to use the proper poly V-belt for your vehicle, since using the wrong belt might harm the belt, pulleys, or engine.

A poly V-belt serves a variety of roles, including:
Transfer power from the engine to the accessories, such as the alternator, power steering pump, and air conditioning compressor.
Reduce vibrations and noises.
Increase the life of the belt and pulleys.

This car part is suitable for the following models:
Aventador LP700 Coupe, Aventador LP700 Roadster, Aventador LP720 Coupe, Aventador LP720 Roadster, Aventador LP750 SV Coupe and 1 other models.

Oil Cooler for Lamborghini

new zone — Sat, 09 Nov 2024 14:58:05 +0000

The Lamborghini part number 420117022A oil cooler is part of the engine cooling system of Lamborghini vehicles. It cools the motor oil, preventing it from overheating and becoming too viscous. This can help the engine run better and last longer.

The oil cooler sits between the engine and the radiator. It’s a compact, cylindrical apparatus with two tanks: one for hot oil and one for cool oil. The heated oil from the engine passes through the first tank and is cooled by the coolant flowing via the radiator. The cooler oil then flows back into the engine.

The size of the oil cooler is determined by the engine and the amount of heat to be evacuated. The Lamborghini Aventador has a -10 AN oil cooler, which is usual for high-performance cars.

If the oil cooler becomes clogged or broken, the engine oil will overheat. This can cause early engine wear and tear, and in some situations, the engine may fail. As a result, the oil cooler should be inspected and maintained on a regular basis.

This car part is suitable for the following models:
Aventador LP700 Coupe, Aventador LP700 Roadster, Aventador LP720 Coupe, Aventador LP720 Roadster, Aventador LP750 SV Coupe and 3 other model(s).

Track Control Arm for Lamborghini

new zone — Mon, 28 Oct 2024 09:26:22 +0000

Lamborghini 4M0407152R track control arm connects the chassis to the wheel suspension. It is an important component of the suspension system because it helps maintain the wheels aligned and prevents them from moving out of position. This is vital for the vehicle’s stability and handling.

The track control arm is often referred to as the wishbone or suspension arm. It is a long, L-shaped metal bar with one end connecting to the chassis and the other to the wheel suspension. The arm pivots at the chassis attachment point, allowing it to move up and down with the wheel.

The track control arm is normally constructed of aluminum or steel. It is a sturdy and durable component capable of withstanding the forces applied by the vehicle’s weight and the road surface.

This car part is suitable for the following models:
Urus.

Track Control Arm for Lamborghini

new zone — Mon, 28 Oct 2024 09:24:04 +0000

Lamborghini item 4M0407151R is a track control arm. A track control arm is a suspension component that connects the wheel hub to the vehicle’s chassis. It aids in controlling the camber and toe of the wheel, both of which are key variables in tyre wear and performance.

The track control arm of the Lamborghini Urus is a critical component since it handles the enormous loads and stresses created by the vehicle’s strong engine and all-wheel-drive system. The track control arm also helps to keep the car stable while cornering and braking at high speeds.

In summary, Lamborghini component number 4M0407151R track-control-arm is designed to ensure that the vehicle’s wheels are properly aligned and that the suspension can withstand the high loads and strains created by the vehicle’s strong engine and all-wheel drive system. This improves the vehicle’s handling, stability, and performance.

This car part is suitable for the following models:
Urus.

Guiding Control Right for Lamborghini

new zone — Mon, 28 Oct 2024 09:21:09 +0000

The Lamborghini component number: 4M0407694F Guiding Control is part of the car’s suspension system. It is mounted on the front axle and serves to steer the wheels during cornering and braking. A steering knuckle, a tie rod, and a control arm are all components of the guiding control system. These components work together to keep the wheels aligned and stop them from wandering.
The steering control is an important component of the suspension system that contributes to the vehicle’s handling and safety. It is also a wearable device that will require replacement on a regular basis. The steering control’s lifespan varies according to driving circumstances and the car’s maintenance routine.

Here are some of the symptoms of a malfunctioning guiding control:
Uneven tire wear.
excessive vibration in the steering wheel.
Pulling to one side during cornering.
Difficulty keeping a straight line.
The noise comes from the front suspension.

If you experience any of these symptoms, you should have the steering control checked by a professional mechanic. A defective guiding control might cause loss of control of the vehicle, thus it should be rectified as soon as possible.

This car part is suitable for the following models:
Urus.

Guiding Control Left for Lamborghini

new zone — Mon, 28 Oct 2024 09:16:48 +0000

The Lamborghini component number 4M0407693F is a directing control. It is part of the Lamborghini Urus’ suspension system. The guiding control is in charge of steering the wheel assembly through its range of motion while maintaining it in line with the chassis. It also helps to absorb road impact and keep the ride comfortable.

The directing control is positioned on the suspension system’s lower control arms. It is linked to both the wheel hub and the chassis. The directing control is built of a durable yet lightweight material, such as aluminum or forged steel.
The steering control is a vital component of the Lamborghini Urus suspension system. It contributes to the vehicle’s handling and performance, as well as the safety and comfort of the driver and passengers.

The following are some of the specific functions of the guiding control:
It controls the wheel assembly’s range of motion, allowing the vehicle to turn and steer smoothly.
It keeps the wheel assembly aligned with the chassis, which reduces tire wear and improves handling.
It absorbs road impacts, allowing for a more comfortable ride.
It adds to the overall strength and rigidity of the suspension system.

This car part is suitable for the following models:
Urus.