Engine – New Zone Auto Spare Parts Trading

Seal Ring for Bentley

new zone — Mon, 25 Nov 2024 09:47:58 +0000

The Bentley WHT002925 seal ring is a small, round rubber ring used to form a watertight seal between two surfaces. It is commonly utilized in the cooling system of a Bentley Mulsanne to prevent coolant from spilling out.
The seal ring sits between the water pump and the engine block. When the water pump pumps coolant through the engine, the seal ring prevents coolant from leaking at the pump-engine connection.
If the seal ring fails, the coolant level might drop, resulting in overheating and engine damage. The seal ring should be inspected on a regular basis and replaced if it shows symptoms of wear and tear.

This car part is suitable for the following models:
Mulsanne (2010+)

Belt Tightener for Ferrari

new zone — Mon, 25 Nov 2024 09:30:59 +0000

The Ferrari belt tensioner part number is 224178. A belt tensioner is a tool used to keep a drive belt at the ideal tension. Power is transferred from the engine to a number of accessories, including the air conditioner compressor, power steering pump, and alternator, via drive belts.

Drive belts may stretch and loosen with time. They may slip as a result and fail to operate the attachments correctly. By maintaining the belt tight, a belt tensioner helps avoid this.

A steady force is applied to the belt by the belt tensioner. Usually, a hydraulic mechanism or spring is used to apply this force. A pulley on which the belt travels is another feature of the belt tensioner. The pulley shifts as the belt expands in order to maintain the proper tension.

This car part is suitable for the following models:
California (2008-2011), California (2012-2014)

Oil Filter for Maserati

new zone — Mon, 25 Nov 2024 08:53:45 +0000

Part number 675000928 is for the Maserati oil filter, a high-performance filtration part made especially for Maserati automobiles. Because it efficiently captures impurities and pollutants in engine oil, this oil filter is essential to preserving engine health.

In conclusion, the Maserati oil filter 675000928 is a crucial part of keeping your Maserati engine operating at peak efficiency and health, ensuring your luxury car is well-filtered and protected. It is advised to replace the oil filter on a regular basis to maintain optimal engine performance.

This car part is suitable for the following models:
Levante (2017+), Levante (2017+) S.

Belt Tightening Pulley for Maserati

new zone — Sat, 23 Nov 2024 16:02:51 +0000

A vital item intended to preserve ideal tension in the engine’s serpentine belt system is the Maserati Belt Tightening Pulley, part number 278950. This pulley, which was expertly engineered, guarantees the seamless operation of several engine accessories, such as the air conditioner compressor, water pump, and alternator.

The pulley is made of premium materials and is intended to last a long time under the demanding circumstances of a high-performance car like a Maserati. Seamless bearings are used into its design to lower friction and encourage effective power transfer.

This car part is suitable for the following models:
Ghibli (2014-2016), Ghibli (2014-2016) S, Ghibli (2014-2016) S Q4, Ghibli (2017+), Ghibli (2017+) S and 8 other model(s)

Evaporator Assy for Maserati

new zone — Sat, 23 Nov 2024 15:45:45 +0000

An essential part of the car’s climate control system, the Maserati Evaporator Assembly (part number 673009412) helps to keep the interior at the ideal temperature. This premium evaporator assembly, made especially for Maserati cars, guarantees optimum performance and a relaxing driving experience.
The Evaporator Assembly 673009412 will improve the comfort and performance of your Maserati so that you may drive in comfort and coolness no matter the outside climate.

This car part is suitable for the following models:
Ghibli (2014-2016), Ghibli (2014-2016) Diesel, Ghibli (2014-2016) S, Ghibli (2014-2016) S Q4, Ghibli (2017+) and 14 other model(s).

Washer for Maserati

new zone — Sat, 23 Nov 2024 15:27:28 +0000

A washer is component number 231388 for Maserati. It’s a little, round metal object with a hole in the middle. In order to keep a nut or bolt from pulling through a surface, washers are utilized to uniformly disperse the load across the surface. Additionally, washers can be used to insulate the bolt or nut from the surface, preventing corrosion or electrical conductivity.

Part number 231388 washers are utilized in many different parts of Maserati automobiles, such as mounting nuts for the engines and transmissions.
bolts for suspension components.
Bolts for installing brake calipers.
bolts for the exhaust system.
Bolts for mounting body panels.

Many Maserati cars have washers as essential parts, and it’s crucial to use the right washer for the job. The car may sustain significant damage if the nut or bolt fails due to improper washer use.
This car part is suitable for the following models:
GranCabrio (2010-2012), GranCabrio (2011-2012) Sport, GranCabrio (2013+), GranCabrio (2013+) Sport, GranCabrio (2013-2015) MC and 20 other models.

Connection Rod Shaft and Cap Assy for Maserati

new zone — Sat, 23 Nov 2024 13:22:36 +0000

Maserati component number 326368 is a shaft and cap assembly for connecting rods. An essential part of a piston engine is the connecting rod, which joins the piston and crankshaft. It transfers the combustion stroke’s impulse to the crankshaft, which turns the wheels and flywheel.

The entire connecting rod, including the rod shaft, cap, and bearings, is referred to as the connecting rod shaft and cap assembly. The cap is a detachable piece that fastens to the rod shaft to provide a bearing surface for the crankpin journal. The rod shaft is the connecting rod’s primary body. The connecting rod may spin smoothly on the crankpin journal thanks to the bearings, which are thin metal sleeves.

To guarantee correct engine operation, the connecting rod shaft and cap assembly is a precision component that needs to be made to extremely strict tolerances. It is an essential component of the valvetrain, and if it fails, the engine may sustain significant damage.

This car part is suitable for the following models:
Ghibli (2014-2016), Ghibli (2014-2016) S, Ghibli (2014-2016) S Q4, Ghibli (2017+), Ghibli (2017+) S and 8 other models.

LH Side Engine Piston W Rings for Maserati

new zone — Sat, 23 Nov 2024 12:57:23 +0000

Maserati component number 318342 is a ringed piston for the left engine. It is an essential component of the engine that aids in transforming air and fuel combustion into mechanical energy. The air-fuel combination is compressed, ignited, and then pushed back down to spin the crankshaft by the piston’s up-and-down movements in the cylinder. By sealing the combustion chamber, the piston rings stop gasses from seeping into the crankcase.

The engine would not be able to run correctly and would finally break down without the piston rings. Additionally, the piston rings lessen friction and lubricate the cylinder walls.

This car part is suitable for the following models:
Ghibli (2014-2016), Ghibli (2014-2016) S, Ghibli (2014-2016) S Q4, Ghibli (2017+), Ghibli (2017+) S and 8 other model(s).

Hydro-Mounting for Lamborghini

new zone — Thu, 21 Nov 2024 15:03:11 +0000

Lamborghini item number 4M0399202G hydro-mounting is intended to reduce noise and vibrations from the engine and gearbox while also giving passengers a more opulent and comfortable ride. A fluid-filled bladder is used by hydro-mountings to absorb and reduce vibrations. The engine and gearbox vibrate, changing the pressure in this pressurized fluid. This lessens the amount of vibration that is transferred to the vehicle’s body and chassis.

Because high-performance cars like the Lamborghini Urus may generate a lot of vibration, hydro-mountings are especially crucial. Hydro-mountings reduce these vibrations, which enhances the vehicle’s performance and handling while also making the ride more pleasant for occupants.

Hydro-mountings can enhance a vehicle’s sound insulation in addition to their ability to dampen vibrations. Passengers may enjoy a more tranquil and opulent interior experience by using hydro-mountings to absorb and reduce engine and transmission noise.

This car part is suitable for the following models:
Urus

Vent Hose for Bentley

new zone — Thu, 21 Nov 2024 09:23:29 +0000

A premium automotive item made especially for use in Bentley automobiles is the Vent Hose for Bentley, with number 36A121081. Assuring ideal air flow and effective operation, this vent pipe is an essential component of the car’s ventilation system.

The hose is made of sturdy materials and is designed to endure high temperatures and gradual wear and tear. It is expertly crafted to satisfy Bentley’s exacting specifications, ensuring a flawless fit and dependable performance.

This car part is suitable for the following models:
Bentayga (2015+)